With a hub motor: I am too breastfeeding to even turn sideways!

With a hub motor: I am too breastfeeding to even fall sideways!

Oh, yes, its wheels do not have the common brake system (brake disc + brake caliper) found on other cars.Instead, there were a bunch of silver lumps that looked a bit confusing.

A lot of evidence indicates that these are most likely the hub motors that everyone says are good but have never been used in mass-produced cars, or a four-motor layout with one motor per wheel.

Friends who know cars will definitely say when they see the four motors, our BYD Yangwang, Dongfeng Mengshi 917 and Mercedes-Benz electric G have already used them, so what's so strange about them.

Indeed, there have been many electric vehicles using four motors. The difference is thatThe motors they use are mostly wheel-side motors, not hub motors.The two motors are actually easy to distinguish. The wheel-side motor is actually like a traditional motor that has been made smaller and then put together to form an N-motor assembly.

Like the Yi Sifang quad motor you look up to, it actually uses a dual motor assembly at the front and rear. Each assembly consists of two motors and looks like this:

With a hub motor: I am too breastfeeding to even fall sideways!

With a hub motor: I am too breastfeeding to even fall sideways!

The way it transmits power to the wheels is similar to that of a traditional motor. It needs to pass through a reduction gear and a half shaft, or a drive shaft, to make the wheels turn.

In comparison, the wheel hub motor is different from the common motor form. As the name suggests, it is not located on the common floor, but in the wheel hub of the car. It drives the wheel by directly connecting the motor rotor to the wheel hub.

Just like the motor and blades of an electric fan, when the motor rotates, the wheels will rotate as well, without the need for various complicated transmission mechanisms.

With a hub motor: I am too breastfeeding to even turn sideways!

What are the benefits of wheel hub motors? There are too many, and many of them are even revolutionary.

For example,With the use of wheel hub motors, the flexibility of the car can take a huge leap forward.

When evaluating whether a car is flexible and easy to drive, there is an indicator called turning radius, which refers to the radius of the circle drawn by the outer wheels when the car turns a circle. The smaller this radius is, the smaller the car can drive in a narrower area, which means it is easier to drive and more flexible.

Most current models still use shaft drive, so the front wheels can’t turn any further after turning about 30-40 degrees. If the angle is further, you’ll sprain your ankle. So even a super-flexible car like the Golf has a turning radius of about 5.5 meters. Without a gap of 10 meters, you can’t turn around.

With a hub motor: I am too breastfeeding to even fall sideways!

Therefore, many high-end models also use a technology called rear-wheel steering, which allows the front and rear wheels to turn at opposite angles to reduce the turning radius.

But if the wheel hub motor is used, the wheel can get rid of the restriction of the drive shaft and turn to a very incredible angle. For example, Hyundai put four wheel hub motors in an Ioniq 5, and its direction was like this.

With a hub motor: I am too breastfeeding to even turn sideways!

Even the front and rear wheels can turn as they please. What is the turning radius? I have never heard of it. . .

What I mean is that if everyone's car uses wheel hub motors, is it necessary to practice parallel parking, turning in a narrow parking space, etc.?I feel like I'm so milky that I can easily control it..

With a hub motor: I am too breastfeeding to even fall sideways!

This is not the end. The hub motor has a more advanced use.That is to replace the original brake system.

The principle is similar to the kinetic energy recovery on current electric vehicles. When the car needs to brake, the kinetic energy of the car can be converted into electrical energy to slow down.

If you encounter a situation where strong braking is required and the kinetic energy recovery is not enough, you can also supply power to the motor in the reverse direction to give the rotor a reverse force, which will have the effect of braking and decelerating.

Whether the deceleration force is strong or not depends entirely on the voltage. The number of pistons in the caliper is not important at all.

With a hub motor: I am too breastfeeding to even fall sideways!

And because this “cyber brake” does not require friction to brake, the heat generated is greatly reduced compared to traditional brakes, so there is basically no need to worry about brake overheating.

Therefore, it can almost be said that if the hub motor is implemented, it will basically be a huge update to vehicle control and safety.

Given the many benefits of wheel hub motors, why don’t people use them? Of course, it’s a common problem with new technologies: they are difficult, expensive, and unstable.

Take the relatively mature modern Mobis e corner system for example. In such a small space inside the wheel hub, it manages to cram in so many structures as the wheel hub motor, brake caliper and brake disc, steering gear and shock absorber bracket.

With a hub motor: I am too breastfeeding to even fall sideways!

With a hub motor: I am too breastfeeding to even fall sideways!

As we all know, anything that is small and complex is difficult to make and more likely to break. This assembly also requires one for each wheel, quadrupling the risk of downtime.

What's worse is that there is an indicator called unsprung mass on the car, which actually refers to the weight of the four wheels + brake system. The larger the unsprung mass, just like the heavier running shoes, the heavier the car will become and the harder it will be to drive.

The modern system is equivalent to adding four more motors to the original wheel structure, which means that the unsprung mass is increased by nearly 100 kilograms for nothing. It is basically like running with a shot put tied to your foot. It would be strange if you could be flexible.

So at the press conference, the person in charge of Hyundai said that it would take at least five years for this thing to go into mass production, and the hub motor is still a conceptual technology, and we won’t see it in the short term.

With a hub motor: I am too breastfeeding to even fall sideways!

Did the dark blue BMW test car at the beginning solve these problems of the hub motor? You know what, I researched the supplier of the hub motor and found that it seems to have something.

The company is called deep drive, which translates toDeep driving.

With a hub motor: I am too breastfeeding to even fall sideways!

In March last year, BMW's i Venture division invested $16.1 million in the company abbreviated as DD to develop wheel hub motors. The version used in the test car is most likely the new motor with a “dual rotor” design used by the company.

The design of this motor is very simple, consisting of two inner and outer rotors plus a stator in the middle. One rotor is responsible for high torque at low speed, and the other is responsible for high speed at high speed.

Although it does not have a gearbox, it has the ability to change speeds in two gears similar to other motors.

With a hub motor: I am too breastfeeding to even fall sideways!

With a hub motor: I am too breastfeeding to even fall sideways!

When compared with modern systems, you can see that it is very small and cute.

It looks simple and reliable, right?

With a hub motor: I am too breastfeeding to even fall sideways!

In order to improve the performance of the motor, DD also uses distributed winding on the stator of this motor.

Compared with the common concentrated winding, it looks obviously more complicated, but it also brings stronger performance and higher efficiency.

With a hub motor: I am too breastfeeding to even fall sideways!

In order to reduce weight, DD completely abandoned the physical braking system like the modern one and completely adopted the “cyber brake” we mentioned, that is, electric motor braking, to control the weight of the hub motor to around 35 kilograms.

According to DD himself, the weight of a car using this system is actually not much different than that using a traditional braking system.

Simple and light, the result of DD's design is that as long as these wheel hub motors can be powered, they can be installed on almost any car model. The power of a single wheel ranges from more than 100 to 250 kW, and car manufacturers can choose according to their needs.

With a hub motor: I am too breastfeeding to even turn sideways!

As for the price, we can roughly guess from the models it is equipped with: BMW M department exclusive models, it should not be too cheap. But DD also said in the introduction information of the motor,They use less rare earth materials to save costs.

Once the production volume is increased, or a version with less powerful performance is released, the price will definitely go down further.

And it's not just BMW. Companies like Mercedes-Benz and BYD have also previously reported that they are developing and investing in technologies related to hub motors.

With a hub motor: I am too breastfeeding to even fall sideways!

I feel like the time is really coming when even novice drivers will be able to handle parallel parking with ease.

It feels like the gap between gasoline cars and electric cars is really getting bigger and bigger.