When did the ball in the mouse disappear–Quick Technology–Technology changes the future

Have you ever seen this little ball inside a mouse?

The small ball inside the mechanical mouse, picture source: Wikipedia

Many friends born in the 80s and 90s may still have an impression of this ball. Just turn over an early computer mouse and twist the knob at the bottom a little, and a small ball like this will fall out.

During the computer class, the teacher had to battle wits with a classmate who secretly pulled the ball out of the mouse to play with. The Internet cafe owner must have experienced this as well.

In fact, there was such a ball on the mouse decades ago. Going back even further, people even put bowling balls directly into the “old-timers” of the mouse.

How can a bowling ball fit into a mouse? Why is it so difficult to see this little ball again today? Let’s talk about it below.

A bowling ball as a mouse?

If you search for “the earliest mouse”, you will most likely find this mouse that was developed in 1964 and patented in 1967. This thing that looks a bit like a toy seems impossible to fit into a bowling ball.

When did the little ball in the mouse disappear?

SRI prototype mouse, image source: Wikipedia

In fact, about 20 years before the birth of this mouse, the “old-timer” of the mouse had already been born. This old-timer was called the “trackball.”

In the mid-1940s, the British Navy was developing an integrated display system as part of a radar mapping system.

At that time, people needed to mark some important information on the display of the radar system. In the process, something called a “rolling ball” was developed.

After all, if you want to move and mark on a 360-degree map, something in the shape of a ball is particularly suitable.

But later, when this system was put into production, the aircraft joystick was still used. After all, the joystick can also be marked with 360-degree rotation, and it was more readily available and did not require special R&D and production.

Later, in the early 1950s, the Canadian Navy also wanted to establish its own battlefield information system. After visiting and studying in the UK, they began to develop their own system DATAR in 1952.

In DATAR, the input system used by Canadians is the trackball. For example, the picture shows the trackball in the DATAR system. In the center of this device is a standard “5-pin bowling ball” ball.

This kind of bowling ball is smaller than the normal bowling ball, with a diameter of about 12 cm, which is suitable for placing on the operating table.

When did the little ball in the mouse disappear?

Trackball used in Canada’s “DATAR” system, picture source: Reference 1

Since such a project is a military secret, the trackball system has not been patented. But it can be regarded as the predecessor of the later roller ball mouse and today's trackball mouse.

The earliest patented mouse

By the 1960s, Douglas Engelbart and Bill English invented the “mouse,” which functioned similarly to the modern mouse.

Engelbart was working at SRI at the time, and he needed to explore how to improve hardware devices to enhance the capabilities of computers.

He hopes to use an external device to cooperate with the keyboard to better move the cursor position for input.

Later, English joined SRI and worked with Engelbart to complete the prototype and apply for a patent in 1967.

The official name of this prototype is “Display System XY Position Indicator”.But Engelbart and English gave the device a simpler name, “mouse”, and the name of the mouse was born.

When did the little ball in the mouse disappear?

“Display system XY position indicator” patent screenshot, picture source: Reference 2

And in 1968, Engelbart conducted a public demonstration demonstrating a variety of human-computer interaction functions including a mouse, video conferencing, and windows.

These technologies that are commonplace today were very new at the time, and even had some science fiction implications. Although many of the products demonstrated at that time did not become popular immediately, they left a deep impression on people.

ball in mouse

When Engelbart's team developed the “Display System XY Position Indicator”, a team in Germany was also developing a similar device. Moreover, the device of the German team was inspired by the trackballs of early radar stations.

When did the little ball in the mouse disappear?

Germany's RKS100-86, picture source: Wikipedia

In 1966, German engineer Rainer Mallebrein had an idea after seeing a trackball.

He felt that if the trajectory was reversed, it could be made into a more convenient input device. Based on this idea, Mallebrain's team invented the RKS100-86, a device very similar to the ball-ball mouse that became popular later.

When did the little ball in the mouse disappear?

RKS100-86 bottom picture, picture source: Reference 3

However, at that time, the German Patent Office did not grant this patent.

Inventor Mallebrain said in a later interview that they also tried to apply for a patent at that time, but the patent office did not accept the application because the patent office believed that “the mechanical improvements of RKS100-86 were not significant enough.”

Although the patent was not successfully applied for, the RKS100-86 is considered the earliest mouse with ball bearings.

In the 1970s and 1980s, more and more roller-ball mice appeared.In 1973, Xerox's Alto computer was born. This computer was one of the first computers for personal users. This computer was equipped with a ball mouse.

When did the little ball in the mouse disappear?

The back of the mouse used by Alto (with three roller balls), picture source: Wikipedia

In 1984, Apple released the Macintosh 128k, a Macintosh computer for the mass consumer market. At that time, this computer was also equipped with a ball mouse.

When did the little ball in the mouse disappear?

Early Macintosh ball mouse, picture source: ebay

Screenshot With the popularity of personal computers in the 1980s and 1990s, scroll mice also entered thousands of households and almost became a standard feature at the time.

The birth of the optical mouse

But today, most mice on the market no longer have small balls. The disappearance of small balls is related to the development of optical mice.

In fact, as early as 1980, Steve Kirsch of MIT developed an optical mouse.

This mouse no longer controls the cursor by detecting the movement of the ball. Instead, it is controlled by an infrared LED light, an infrared sensor inside the mouse, and a special mouse pad.

When did the little ball in the mouse disappear?

Infrared mouse and special mouse pad, picture source: Wikipedia

Yes, this mouse can only be used on a special mouse pad, and if the mouse pad is placed in the wrong direction, the mouse will not work properly. This is still quite inconvenient compared to the ball-ball mice at the time. Moreover, There is a problem with mouse pad wear causing erratic positioning.

Also in 1980, Richard Lyon of Xerox also invented a mouse based on an optical sensor.

The mouse is equipped with a 16-megapixel visible light image sensor. Simply put, the working principle of this mouse is to quickly take photos of the bottom of the mouse when moving, and determine the position of the mouse by comparing the differences between the photos.

But the resolution of 16 pixels is too low. To process higher-resolution images, a chip with more powerful processing power needs to be built in. In the early 1980s, the cost was relatively high.

By the late 1990s, Microsoft and Hewlett-Packard (later spun off as “Agilent”) began to release their own optical mice.

Although optical mice were more expensive than mechanical mice at the time, optical mice began to occupy their own market because optical mice could be used on most surfaces and did not require taking out the mouse ball to clean from time to time like mechanical mice.

However, ordinary LED optical mice have a drawback, that is, they cannot be used on particularly smooth surfaces or glass desktops.

If you have used an early optical mouse, you may have this experience. Early optical mice tend to “float” when used on a particularly smooth desktop. Another type of optical mouse can solve this problem.

In the late 1990s, laser mice began to appear. Laser mice use lasers instead of LED light sources for illumination. Lasers can significantly increase the resolution of captured images, which can increase the sensitivity of the mouse (DPI).

By the early 21st century, laser mice had become more versatile, functioning on almost all types of surfaces (including glass).

What we can buy online now are mainly optical mice based on LED light or laser. If you are just buying a mouse for daily office use, the difference between the two mice is not very big.

The only thing to note is that if your desktop is very smooth or you often work on a glass desktop, it is still recommended to use a laser mouse.

Of course, you can also find ball-based “trackball mice” on the market now. But generally speaking, trackball mice tend to be more expensive than optical mice.

If you want to experience the “ancestor” feeling of a mouse, you can also try this type of mouse. A suitable trackball, combined with the correct usage posture, can reduce some of the burden on your wrists and shoulders. After all, you only need to move your fingers. .

When did the little ball in the mouse disappear?

Trackball mouse, image source: Wikipedia

What other mouse controls can be used in the future?

From the birth of the mouse to the present, there have been mechanical mice (including trackballs) – LED mice – laser mice. Is it possible that other mice will appear in the future? Of course it is possible.

For example, inertial sensors can detect parameters such as acceleration, rotation, tilt, etc. of motion. We have such sensors in our mobile phones, and these parameters can also help the mouse determine the movement status.

In addition, in 2021, an article in MIT Technology Review mentioned the use of brain-computer interfaces to assist people with disabilities to operate the mouse and keyboard.

When such technology matures, it will not only help people with disabilities better use electronic devices, but may also be applied in the lives of ordinary people to provide convenience for our lives.