FRITZ!Box 6690, 6660 and 6591 Cable now also with a laboratory update

AVM is finally making the rounds and is also releasing an update for the cable boxes over the weekend. This means that all 8 FRITZ!Boxes have received an update today. You can read about the other 5 here.

The cable boxes also have new functions that have been added for Smart Home. However, the list of corrections is much longer.

  • NEW On the FRITZ!DECT 350 device page in the FRITZ!Box user interface, the window open detection can be set up for the selected radiator controls
  • NEW The templates also allow you to set the target temperature for radiator controls, the brightness, saturation and color for lamps and the position for roller shutters in percentage increments
  • NEW Routines can also be triggered by a preset or astronomically specified time

Improvements in FRITZ!OS 7.90

  • Internet:
  • Fixed Active WireGuard® connections may have been interrupted when adding or deleting WireGuard® connections
  • Change In PPPoE passthrough mode of the FRITZ!Box, DNS “root queries” are no longer filtered via UDP
  • Improvements in FRITZ!OS within FRITZ!Labor
  • Internet:
  • Fixed If a new WireGuard® connection failed to be set up, an email was still sent to set it up
  • Fixed When creating WireGuard® VPN connections, a warning about manually adding connection settings appeared incorrectly
  • Fixed When importing WireGuard® configuration files, a connection was still created if an empty file was specified
  • Fixed Disabling automatic determination of IPv4 binding on IPv6 ports did not work
  • Fixed The blue mark on the selected “Online Monitor” area in the menu disappeared when switching to the “Individual Devices” view
  • Fixed Speed ​​display in the overview and in the online monitor was not correct when using an existing Internet access via WLAN (with separate connection setup)
  • Fixed In the IPv4 settings of a network device, only the last octet of the IPv4 address could be changed regardless of the subnet mask
  • Fixed Network devices could appear as locked even though they were unrestricted in parental controls
  • Fixed Using IPv6 over WireGuard® VPN connections did not work
  • Fixed Under certain circumstances, it was not possible to establish WireGuard® VPN connections if the FRITZ!Box was operated on an external modem or router with DS-Lite ports
  • Fixed In some cases, the import of VPN configuration files for IPSec connections was incorrect
  • Fixed Manually configured DNS servers with DoT (DNS over TLS) enabled may not be displayed in the online monitor
  • Fixed VPN connections from Android devices via IPSec with IKEv2 to the FRITZ!Box were not possible
  • Improvement Permanently saving the selection of individual devices for which the Internet usage is displayed in the online monitor
  • Improved function for resetting all device-related data on Internet usage on the “FRITZ!Box Support” page
  • Change The number of devices for which information on Internet connection usage can be stored is limited to 20
  • VPN change: For compatibility reasons, the SHA-1 hash algorithm is still supported in IPSec (IKEv1)
  • Meshes: Fixed In the graphical overview of the user interface, the display of a connected device was partially cut off
  • Telephony: Fixed Under certain circumstances, phone numbers were no longer registered after a while
  • Home network:
  • Fixed When turning guest access on or off, the devices using the WLAN guest access were not displayed correctly in the network device tables until the page was reloaded
  • Fixed The link to port forwarding in the details of network devices was broken
  • Fixed In the details of guest devices it seemed that changes to the IP settings were possible
  • Fixed In the details of inactive network devices, the function to start computers in standby mode over the network was missing
  • SmartHome:
  • Fixed The “Temperature” tab with the temperature history was not displayed for groups consisting exclusively of radiator controllers
  • Fixed In the Smart Home network, the FRITZ!DECT 302 or FRITZ!DECT 301 registered to the Mesh Master was not visible on the user interface of the Mesh Repeater if the software of the Mesh Master was newer than that of the Mesh Repeater
  • System:
  • Fixed On Mesh Repeaters it was not possible to enter a personal subject in the push service settings
  • Fixed Changed recipients were not immediately displayed on the push service overview page
  • Improve stability
  • Change Information areas “Calls”, “Home network devices” and “Convenience functions” on the Overview page shortened or rearranged
  • USB-C: Improvement Improved compatibility with some USB sticks

Here, too, the update can be accessed via the settings. The manual update can be found (as always) on the AVM page. So, that's probably all that's coming from AVM today.