FRITZ!Box 7583 and FRITZ!Box 7583 VDSL also receive FRITZ!OS 7.59

The updates from AVM are coming in dribs and drabs. Now the FRITZ!Box 7583 and FRITZ!Box 7583 VDSL have been added. These two boxes also receive FRITZ!OS 7.59 with long release notes. The FRITZ!Box 7490, 7530, 4040 and 4060 had already received FRITZ!OS 7.59 and the FRITZ!Box 7530 AX had received FRITZ!OS 7.81.

FRITZ!Box 7583 and FRITZ!Box 7583 VDSL

  • Internet:
  • Fixed When a VPN connection via WireGuard® was active and all network traffic was transmitted, the FRITZ!Box allowed a user selection for external HTTPS access
  • Fixed Problems occurred with DNSSEC validation in FRITZ!OS
  • Fixed FTP connections from a network device that was completely exposed to the Internet (Exposed Host) were too slow
  • Fixed Incorrect entry for the NTP server in the DHCPv6 reply of the FRITZ!Box meant that IPv6 home network devices could not obtain a valid time
  • Fixed IPv6 shares as “Exposed Host” of devices with delegated IPv6 prefix were deleted under certain circumstances
  • Fixed Filtering https pages did not work reliably in certain browser versions
  • Fixed Mesh telephony was not possible with a FRITZ!Box connected as a Mesh Repeater via WLAN
  • WIRELESS INTERNET ACCESS:
  • Improved interoperability with specific counterparts (Chromecast, vehicle diagnostic tool)
  • Telephony:
  • Fixed Outgoing calls to mobile phone stations were interrupted after 2 minutes in certain scenarios
  • Fixed: During existing phone calls, voice transmission would break off after a certain time under certain conditions
  • Fixed After changing the public IP address, in some constellations there was a temporary limitation in telephone accessibility
  • Fixed Parallel calls via an ISDN PBX connected to the FRITZ!Box failed sporadically
  • Fixed Registration of phone numbers failed in certain constellations
  • Fixed Telekom CompanyFlex SIP Trunk – Outgoing calls with withheld number failed
  • Improvement For the provider Telekom, the list of voice codecs for telephony has been revised
  • Improvement Stability of phone calls increased
  • SmartHome:
  • Fixed Empty Smart Home pages were sometimes displayed on the FRITZ!Box user interface
  • Fixed The freely selectable device name for FRITZ!DECT 350 was not adopted
  • Fixed Devices that were registered with the FRITZ!Smart Gateway were not displayed on the user interface of the connected FRITZ!Box
  • Fixed Status of the FRITZ!DECT 350 was incorrectly transmitted in the Smart Home network
  • Fixed Link for an automatic offset adjustment between an external temperature sensor and a radiator controller was lost when restarting the FRITZ!Box
  • System:
  • Fixed When using the function “Transfer settings to a new FRITZ!Box”, the “factory settings” state of the new FRITZ!Box was not reliably recognized in some cases and the transfer of the settings was not possible
  • Fixed When using the “Transfer settings to a new FRITZ!Box” function, settings for DNS rebind protection were not transferred to the new FRITZ!Box
  • Fixed When using the “Transfer settings to a new FRITZ!Box” wizard, a successful Internet connection via DOCSIS was sporadically not recognized on the new device and an inappropriate error page was subsequently displayed
  • Fixed When using the function “Transfer settings to a new FRITZ!Box”, the IP filter list was not transferred to the new FRITZ!Box
    -Fixed When using the “Transfer settings to a new FRITZ!Box” wizard, the backup of the FRITZ!Box internal memory unnecessarily included files that were located on an external USB storage device connected to the FRITZ!Box
  • Fixed When using the “Transfer settings to a new FRITZ!Box” wizard, an error occurred if a different IPv4 address range than the preset range was used in the home network
  • Fixed After a failed download of a FRITZ!OS update, further update requests may not have been executed
  • Fixed If a FRITZ!OS update of the new FRITZ!Box was required when using the “Transfer settings to a new FRITZ!Box” function, the successful update was sporadically not recognized afterwards and the error message continued to appear incorrectly that the FRITZ!OS of the new FRITZ!Box was too old
  • Improvement When using the “Transfer settings to a new FRITZ!Box” wizard, the settings for the splash page of a public Wi-Fi hotspot are now also adopted for the new FRITZ!Box
  • Improve stability

Of course, we will also update our AVM update overview for the various devices.