Aqara presence sensor FP2 tried – Deskmodder.de

Some time ago I got the FP2 presence sensor from Aqara just to try it out. You can come across some very different reports on the internet. Some are very satisfied with the device, others not at all. Since the release there have been a few firmware updates that are said to have improved functionality. By the way, a presence sensor can consistently determine where people are in a room (even without movement) and thus allows for slightly different areas of application than a simple motion detector.

The white Aqara sensor can be screwed, glued or magnetically attached to the ceiling or wall. Due to the technology used (mmWave Radar), a permanent power supply via USB-C port is required. Here is a photo of the sensor with a standard AA battery for size comparison:

I use Apple Home with several HomePods as the control center and the FP2 can be connected to my own home without an additional bridge. You can then set up any zones in the Aqara app, each of which is displayed as an independent sensor in Apple Home. There are 2 states: either presence detected or not.

I've experimented a lot and can't complain about the results. If you position the sensor correctly, it works precisely and reliably. A bad position would be, for example, directly at a door, as in the screenshot above: If a second person enters the room, they may briefly “hide” the view of a person already in the room and, due to the fast reaction times of the sensor, in the example The “Sofa” zone is switched to “no presence” for a brief moment. If you position the sensor better – for example on the ceiling – then this doesn't happen. I didn't have any problems with several people in one room.

For me, the FP2 has proven itself in terms of presence detection in everyday life. However, I wasn't able to try out how the device handles animals or small children.

In my tests, the sensor consistently had a fluctuating consumption of 0.9 to 2.9 watts depending on the activity in the room. So it's not nothing and, especially with several sensors in the house, it can add up. But leave the telly off once and you've recouped the sensor's annual consumption. The sensor becomes noticeably warm during operation.

Unfortunately, one more thing to say about the Aqara app is that you inevitably have to create an account to use it to its full range of functions. And if you get the FP2 sensor, then this is practically unavoidable.

And then there's something else: If I remove the internet connection (not: network connection) from the FP2 sensor in the router, it no longer works.

Aqara is a brand of Shenzhen-based Lumi United Technology Co. Limited. Over the years, Aqara has developed a decent reputation in the smart home sector and its products are significantly better than, for example, those from Meross, which is also Chinese. But there is still an aftertaste when you have a product from China with an account and internet requirement in your living room, bedroom or children's room.

If you ignore that, then overall I'm happy with the sensor. It works precisely and quickly for me and alternatives are few and far between. On Amazon The Aqara FP2 costs around 80 euros. Further information can be found on the Manufacturer website.