Flexispot manufactures all kinds of quality office equipment, including height-adjustable desks and office chairs.In this test we present the Flexispot office chair BS13, which combines elegant design, high-quality material and pleasant seating comfort.
Flexispot office chair BS13: technical details and structure
Technical details
- Upper material: elastic knit fabric (backrest), fabric (seat)
- Castors: plastic
- Frame: steel
- Chair mechanism: seesaw mechanism including seesaw lock and 3 locking positions
- Chair weight: 20.7 kg
- Seat height: 44 – 52.5 cm
- Seat (W x D): 50 × 45 – 51 cm
- Backrest height: 52 cm
- Backrest width: 43 cm
- Tilt: 105 to 125 degrees
- Maximum weight: 150 kg
- Maximum height: approx. 193 cm
- Other: 1D armrests, height adjustable lumbar support, adjustable seat depth, adjustable tilt tension
- Colours: red, light grey, black
Construction
Included with the Flexispot office chair BS13 everything that is needed for assembly is included: screws and a suitable Allen key.The assembly instructions is ultimately short with exactly two pictures, but shows the few points where questions could arise.
Basically, you put the wheels on the base and use the gas spring.Then assemble the backrest to the seat as shown in the instructions, then the two armrests.After 10 minutes we were already done.It’s definitely a little easier to set up with two people, but it wasn’t a problem on my own.
Flexispot office chair BS13: material and upholstery
The backrest of Flexispot office chair BS13 is covered with an elastic knitted fabric that is not made of fabric but of synthetic fibers (polyamide).This has a number of advantages, because the knit structure ensures high air permeability, the heat build-up on the back should be minimal here.
In addition, the synthetic fibers are extremely easy to care for and at the same time are expected to be very durable.If you want to clean the chair, it is enough to wipe it with a damp cloth or vacuum it.At the same time, there is no risk of the cover rubbing off in the long term, as can happen with fabric covers.
The knitted fabric is pleasantly stable and yet feels soft, the backrest is very comfortable and the knitted look is something new and looks really good at the same time.
The seat of the Flexispot office chair BS13 is covered with fabric (cotton + synthetic fibers).It is a very soft and comfortable material that feels very high quality.The seat is softly padded so that your buttocks nestle comfortably inside.
Armrests, backrest construction and wheels are made of sturdy plastic, the base is made of steel painted in a matching colour.
Flexispot office chair BS13: ergonomics

An office chair like that Flexispot BS13 is designed to enable the most ergonomic seating position possible.People who work in a sedentary job and sit at a desk for at least eight hours a week are often doing their body a disservice due to the amount of sitting.An ergonomically designed office chair or gaming chair ensures that there is minimal strain on the back while sitting and that the muscles in the back, arms, legs and fingers remain in a healthy position without cramping.In addition to such a chair, the use of height-adjustable desks like that Flexispot E7 recommended to support healthy work in the office.

gas spring and seat
Thanks to the high-quality gas pressure spring, you can adjust the Flexispot office chair BS13 continuously by a total of 6.5 centimeters from a seat height of 44 cm to 52.5 cm.For ergonomic sitting, it is important that the seat height is chosen so that you can complete sole of the foot the Floor touched and the Knee doing one 90-degree angle form.Accordingly, the BS13 should fit people up to about 1.89 tall, for particularly tall people or those with long legs a few centimeters could be missing here.
Between the lower leg and the edge of the seat should not be more than 2 – 3 finger widths apart lay.These rules ensure that you sit far enough back on the seat so that the ergonomic properties of the Flexispot office chair BS13 really come into their own.
So that even as a taller person you can sit comfortably with your whole buttocks on the seat and at the same time far enough back and make the optimal adjustment so that you keep the 2 – 3 finger width distance, you can push the seat of the BS13 forward by 6 cm. by operating the appropriate lever on the left side of the chair.The seat can be fixed using the same lever so that you don’t slip around unintentionally.
These two functions ensure that people of different heights can sit in an ergonomic position on the Flexispot office chair BS13.We tested the chair with a person who was 164 cm tall and a person who was 191 cm tall.People taller than 191 cm are likely to still sit well, but not perfectly.

Backrest and rocking mechanism
The backrest of Flexispot BS13 is, as already described above, covered with an elastic knitted fabric made of synthetic fibres.This fabric not only ensures a very pleasant climate on the back, it is also extremely comfortable.The structure and composition make the knit fabric soft yet supportive.In other words: You lean back and feel comfortable.
In the lumbar area, the Flexispot office chair has a lumbar support that can be adjusted in height on the back of the backrest to support the natural double S shape of the spine.The lumbar support adapts very well to the individual back and provides support without pressing.
In order to change the inclination of the backrest, you will also find a rotary knob on the bottom right of the seat.
The entire backrest is equipped with a rocking mechanism, with which you can rock back and forth very comfortably and relax your back in between.If the lever on the left of the seat is set to seesaw, you can tilt the backrest backwards by up to 125 degrees and simply lean back during the break.
Thanks to the locking function, you can fix the backrest of the Flexispot office chair BS13 in a total of three positions.Of course, you can also lock the rocker function – but we recommend everyone who sits a lot to use the rocker function.

armrests
The armrests of the Flexispot office chair BS13 can be adjusted in height and thus adapted to the length of the upper arms.So these are 1D armrests, a change in the armrest position forwards/backwards is only achieved by moving the seat.A horizontal turning or shifting to the side is not possible.
Despite the armrests not being adjustable too variably, we achieved an optimal posture, which means we didn’t miss any other functions, and in our case the specified position of the armrests also made it possible to sit cross-legged without them getting in the way.
In a healthy posture, both shoulders are horizontal with relaxed shoulder and neck muscles, while the forearms are relaxed on the armrests lay up.The upper arm and forearm should be approximately perpendicular to each other stand.

Flexispot office chair BS13: conclusion
The Flexispot BS13 is an absolutely recommendable 5-star office chair.You sit super comfortably and at the same time so ergonomically that your back is still relaxed even after eight hours.The rocking mechanism is adjusted in such a way that you like to use it to stretch and lean back comfortably in between.Material and workmanship are of high quality, the design is very appealing – both points, which are of course also reflected in the price, which is in the higher price segment with an RRP of €699.99.But you also get a chair for your money that will serve you well for many years – Flexispot gives a whopping 10-year guarantee on this chair for good reason.
For more exercise in everyday work, we also have that Table bike Flexispot V9U for the office tested for you!
You can find lots of offers for games, technology and hardware on our PCGH Deals page!
Our new site
Do you love gardening and DIY?
We also!Visit our new website SmartimGarten.de – with over 200 guides on the topics of gardening, tools and DIY.
SmartimGarden
