[XBS/XBX/XBO] The ESD Booster U21 IC for Xbox One X, Xbox Series X and S – News and updates posted on LS

Many ICs are offered by a few websites, and one of them can be a solution to many problems encountered by Xbox One X, Xbox Series S and Xbox Series X users.

The ESB Booster U21 IC is a very fragile circuit, on Xbox One X, Xbox Series X & Series S consoles, this circuit is known to fail when the HDMI port is damaged or there is a power spike .This original circuit is a small 3x3mm glass BGA circuit which is very fragile and sensitive to heat and movement.

Thus the Ubermicro.co.uk site offers a solution to replace this integrated circuit with a much more robust circuit, and easy to install.However, it should be borne in mind that although it is a replacement circuit, certain technical characteristics may be missing or not work.

So far :

4kUHD @ 60hz = Works (120hz TBC)

1440p@60/120hz = Works

1080p @ 60/120hz = Works

720p @ 60hz = Works

CEC (power on/off/input select) = Works

Here are some features:

-HDMI 1.4, 2.0 & 2.1

– 8 kV contact ESD protection

– DC link protection (I2C), bi-directional signal conditioning circuit and dynamic pull-up

– CEC bus protection

– HPD pulls down, signal conditioning with level shifting and backdrive protection

– Short circuit protection on the 5V output

– Wake up from sleep state via CEC bus

– Long and/or poor quality cable support with dynamic pull-up on the DDC bus

– Note that the removal of the old U21 glass BGA circuit board is necessary before installation.

– Allows you to test HDMI ports / HDMI TVS diodes and HDMI drivers

This solution is also an excellent diagnostic tool.If you’re used to rebuilding pads for broken HDMIs, USB-C ports, with “only” 14 jumper wires to run, once installed, testing can be started in less than 45 minutes (if you take your time).