Can you overclock an RTX 4070 to the Ti? Tuning, OC, UV and Fps per Watt

Although the AD104 is used by both the Geforce RTX 4070 and the RTX 4070 Ti, the level of performance is too great due to further changes for the RTX 4070 (here our XXL test) to reach the pure fps power of the RTX 4070 Ti could.

The Geforce RTX 4070…

  • … is equipped with 14 fewer shader multiprocessors (CU/SMs) (46 vs. 60 units).
  • … has 5,888 instead of the full 7,680 FP32 ALUs.
  • … offers less level 2 cache with 36 MiB instead of 48 MiB.
  • … is based on the same chip basis as the RTX 4070 Ti, but is limited more than just on the clock/power draw side.
  • … like all stronger Ada cards, supports DLSS 3.0 (frame generation).

Nevertheless, it is exciting to what extent the differences between the models also with manual tuning such as classic overclocking (OC) or undervolting (for higher efficiency) fail – also with regard to older ampere models such as the Geforce RTX 3080 with 12 GiB.

To show the nuances, two example scenarios can be used:

  1. WQHD with ray tracing (Cyberpunk 2077, 1st page) as well
  2. UHD with pure rasterizing (God of War, 2nd page) – both with DLSS Quality.

David versus Goliath, literally: The weaker giant on the left (RTX 4070 Gigabyte Aorus Master, David versus Goliath, literally: The fainter giant on the left (RTX 4070 gigabyte Aorus Master, with the thickest cooler and power limit) must join the smaller map (RTX 4070 Ti Gigabyte Eagle OC) beaten on the right with a stronger AD104 expansion.No matter how hard you overclock and push the power limit, you won’t be able to beat the Geforce RTX 4070 up to the RTX 4070 Ti.But that efficiency level can very well be achieved (practically approximately) – see results.Source: PC Games Hardware

Example 1: Ray tracing

You have to give Nvidia one thing, in terms of power draw, or rather efficiency, the newer Ada models consume significantly less than the previous generation.Even with undervolting, our Geforce RTX 3080 (also with 12 GiB VRAM) sent into the race with approx. 288 watts of board power is still more power-hungry than all the tuning scenarios of the competitors.

scenarioCyberpunk 2077: Ultra RTX, WQHD, DLSS Q – “Red Light Alley”
Geforce RTX 3080: Asus TUF, 12 GiBfps per wattboard powerØ fpsP1 fpsØ tacttemperature, fan
OC (+120 Core, +750 Memory Clock, +7% PL & Temp)0.19approx. 350 W68.157.21,955MHz63 °C, 1,955 rpm
standard configuration0.20approx. 338 W66.657.11870MHz62 °C, 1,825 rpm
UV (curve editor: 875 mV at 1845 MHz)0.23approx. 288 W64.955.61840MHz59 °C, 1,600 rpm
Geforce RTX 4070: Gigabyte Aorus Master, 12 GiBfps per wattboard powerØ fpsP1 fpsØ tacttemperature, fan
OC 1 (+160 Core, +1600 Memory Clock, +62% PL & Temp)0.33approx. 213 W70.260.03015MHz47 °C, 1,190 rpm
OC 2 (+50 core, +1000 memory clock, -15% PL)0.37approx. 179 W66.156.32,785MHz45 °C, 1,080 rpm
standard configuration0.33approx. 201 W66.355.92,855MHz47 °C, 1,170 rpm
UV (curve editor: 915 mV at 2,655 MHz)0.44approx. 140 W61.953.52,655MHz43 °C, 1,040 rpm
Geforce RTX 4070 Ti: Gigabyte Eagle, 12 GiBfps per wattboard powerØ fpsP1 fpsØ tacttemperature, fan
OC (+120 core, +1100 memory clock)0.33approx. 253 W82.468.52,910MHz58 °C, 1,660 rpm
standard configuration0.32approx. 245 W79.164.72,795MHz58 °C, 1,620 rpm
UV (curve editor: 890 mV at 2,535 MHz)0.46approx. 155 W71.859.92,535MHz49 °C, 1,350 rpm
System: i7-12700K (no limit), MSI Z690 MEG Unify, 32 GiB DDR5-5600 CL36 Corsair Vengeance, Scythe Fuma 2 Rev B, Seasonic PX-850.Windows 11 21H2.ambient temperature of 22 °C.Remarks: Undervolting values ​​fixed via the curve editor (MSI Afterburner), but voltage and detail values ​​are determined by the driver.There are still minimal differences in consumption and stability.Values ​​recorded via CapframeX, hardware consumption is usually slightly higher.color coding related to the entire column, the greener, the more efficient or more fps per watt (Ø) in the scenario.Core and memory clock in MHz (rounded in increments of 5).

Unique pattern: The efficiency level of the two AD104 models is on par, but with the full configuration (the RTX 4070 Ti) it is possible to achieve slightly more fps per watt, provided you create an effective, stable voltage curve yourself (targeted undervolting).In the standard configuration, the RTX 4070 scales beautifully with its larger sister card.The Ampere GPU has to admit defeat completely, and without the artificial intermediate frames.

Cyberpunk 2077: Ultra RTX, WQHD, DLSS Q – “Red Light Alley”

Cyberpunk 2077: Ultra RTX, WQHD, DLSS Q – Red Light Alley

info icon
game/versionCyberpunk 2077 v1.62 (Hotfix)
detailsUltra RTX preset with WQHD, DLSS Quality.Tuning profiles & more information see table.
Software/DriversCapframeX/Geforce GRD WHQL 531.68

Surname

1440p, DLSS Q (Average Fps)

Minimum fps

It’s lonely at the top: The Geforce RTX 4070 Ti mercilessly ignores any tuning of the other cards, with maybe one exception: The OC profile of over 3.0 GHz puts the RTX 4070 quite close to one undervolted RTX 4070 Ti back.That means: only if you let the smaller one work at its stable clock limit and the stronger one work more efficiently can one definitely speak of a similar frame rate.Only the efficiency suffers.In the standard configuration (stock) or even with overclocking, the RTX 4070 Ti is unattainable.Is it different with rasterizing?On the next page we look at God of War in pure (classic) rasterizing.

next pagenext page