An updated version of the palera1n jailbreak has been released, supporting the latest iOS 16.3.1.
This is a semi-attached “jail” (requires reinstallation after each reboot of the gadget), supporting devices with A8-A11 processors through the checkm8 exploit.That is, it supports the following devices:
● iPhone SE
● iPhone 6 / iPhone 6 Plus
● iPhone 6s / iPhone 6 Plus
● iPhone 7 / iPhone 7 Plus
● iPhone 8 / iPhone 8 Plus
● iPhone X
● iPod touch 6
● iPod touch 7
● iPad mini 4
● iPad Air 2
● iPad 5
● iPad Pro 12.9 inch (2015)
● iPad Pro 9.7 inch (2016)
● iPad 6
● iPad 7
● iPad Pro 12.9-inch (2nd generation, 2017)
● iPad Pro 10.5 inch (2017)
How to install
This will require a Mac.
1. Download palera1n from GitHub.
2. Open Terminal and write the commands “cd ~/Downloads” and “sudo mv ./palera1n-macos-universal /usr/local/bin/palera1n” (without quotes).
3. Enter an administrator password, if required.
4. Write the commands “sudo xattr -cr /usr/local/bin/palera1n” and “sudo chmod +x /usr/local/bin/palera1n” (without quotes).
5. On devices with an A11 chip, you must disable the passcode and will not be able to use it or related features such as Face ID/Touch ID and Apple Pay until you reset your iPhone to factory settings.
Also, if you are using iOS 16 with an A11 processor and have ever set a passcode, you must erase all content and settings before jailbreaking.You can do it in section Settings -> General -> Transfer or reset iPhone -> Erase all content and settings.
Important: Be sure to make a backup.
6. Connect your iPhone/iPad/iPod touch to your Mac.Write the command “palera1n-cf” (without quotes) in the Terminal.
7. The smartphone will start entering recovery mode.Press Return to switch to this mode.
8. Wait for the jailbreak procedure to pass.
An error “Error: Timed out waiting for download mode (error code: -status_exploit_timeout_error)” may occur.To solve it, simply reconnect the gadget to the computer.
9. As soon as the gadget turns on again, write the command “palera1n -f” (without quotes) in the Terminal.
10. Repeat steps 7 and 8.
11. Open the new palera1n application on your desktop.
12. Click the Install button, and at the end of the installation – Respring.
That’s it, you have successfully installed the palera1n jailbreak. [iClar]

To bookmarks
iPhones.ru
Instructions for installing the latest jailbreak.
- Before ←
How a handsome actor Ashton Kutcher turned into an investment shark in 10 years.Now all of Hollywood wants it too